Supplies
- Easy Rule
- Easy Rule Jr. (optional)
- Easy Angle (6 1/2")
- Companion Angle
- Tri-Recs Tools

Fabrics
- 2/3 yd. Yellow Solid
- 3/8 yd. Medium Blue Print
- 2/3 yd. Dark Blue Print
- 2 pks. Wrights^® Double Fold Bias Tape (Delft 040)
*Fabrics used in this quilt were from Granny's Sixth Collection by Chanteclaire Fabrics

Five of the blocks contain 4-patches in the corners. To quickly construct all the 4-patches, sew the 2" yellow solid and medium blue print strips together in pairs (see illustration 1). Press the seams towards the blue print, being careful to keep the strip set straight. Cut the strip sets into forty 2" wide units. Sew two units together, alternating colors, to make a 4-patch (see illustration 2). Press. Make a total of twenty 4-patches.

Block 1
Cut 8 - 2" strips from strip set for 4-patches
Cut 4 - Tri pieces from 3 1/2" strip of yellow
Cut 8 - Recs pieces from 3 1/2" strip of dark blue print
Cut 1 - 3 1/2" square from medium blue print

• Construct four Tri-Recs units following the directions in the Tri-Recs package.
• Sew the 3 1/2" square of medium blue between two Tri-Recs units to make the center row of the block. Press towards the center square.
• Sew 4-patches to both sides of the remaining Tri-Recs units. (Watch the placement of the blue squares!) Press towards the 4-patches.
• Join the three rows to make the block. Press the seams toward the center row.

Block 2
Cut 8 - 2" strips from strip set for 4-patches
Lay yellow and dark blue print 3 1/2" strips, right sides together, and cut 4 Easy Angle triangles
Cut 1 - 3 1/2" square from medium blue print

• Sew on the diagonal edge of the triangles, forming four squares. Press towards the blue triangle.
• Sew a 3 1/2" medium blue square between two triangle squares to make the center row. Press toward the square.
• Sew 4-patches on both sides of the remaining two triangle-squares. (Watch the placement of the blue squares!) Press towards the 4-patches.
• Join the three rows. Press the seams toward the center.

Block 3
Cut 8 - 2" strips from strip set for 4-patches
Cut 4 - Companion Angle^TM triangles from 2" strip of yellow
Cut 4 - 2" x 3 1/2" rectangles from 2" strip of yellow
Cut 1 - 3 1/2" square from medium blue print
Cut 8 - Easy Angle^TM triangles from 2" strip of dark blue.

• To construct the star point unit, sew a dark blue triangle to the right edge of the yellow Companion Angle triangle. Press toward the blue triangle.
• Sew another blue triangle to the left side of this unit and press toward the blue triangle. Make four units.
• Add a yellow rectangle to the top of each unit and press toward the rectangle.
• Sew two star point units to a 3 1/2" medium blue square. Press toward the square.
• Sew 4-patches to both sides of the remaining star point units. Press toward the 4-patches.
• Join the three rows. Press the seams toward the center.

Block 4
Cut 8 - 2" squares from the medium blue print
Cut 1 - 3 1/2" square from medium blue print
Cut 4 - Companion Angle^TM triangles from 2" yellow strip
Cut 16 - Easy Angle^TM triangles from 2" yellow strip
Cut 4 - Companion Angle^TM triangles. from 2" dark blue strip
Cut 16 - Easy Angle^TM triangles from 2" dark blue strip

• Assemble eight star point units following the previous directions. Four of the star points will have yellow Companion Angle triangles and blue star points, and the other 4 will have blue Companion Angle triangles and yellow star points.
• Join the two different star point units in pairs as in the illustration. Press the seam toward the blue Companion Angle triangle.
• Assemble the triangle squares for the 4-patches. Assemble the 4-patch units for the corners using the illustration as a guide.
• Sew two star point units to both sides of a 3 1/2" medium blue square. Press toward the square.
• Sew 4-patches to both sides of the remaining star point units. Press toward the 4-patches.
• Join the three rows. Press the seams toward the center.

Block 5
Cut 8 - 2" strips from strip set for 4-patches
Cut 1 - 3 1/2" square from medium blue print
Layer 2" dark blue print and yellow strips, right sides together, and cut 8 pairs of Companion Angle^TM triangles

• Sew the triangles together on the right diagonal edge, with the same fabric on top each time. Press the seam toward the blue fabric.
• Join the units in pairs to make the star points. Press.
• Sew a 3 1/2" medium blue square between two star point units. Press toward the blue square.
• Sew 4-patches on both sides of the remaining star point units. (Watch placement!) Press the seams toward the 4-patches.
• Join the three rows. Press the seams toward the center.

Block 6
Cut 8 - 2" strips from strip set for 4-patches
Cut 1 - 3 1/2" square from medium blue print strip
Cut 4 - Tri pieces from 3 1/2" dark blue print strip
Cut 8 - Recs pieces from 3 1/2" yellow print strip

• Assemble four Tri-Recs units following the directions in the package. Note the colors are reversed from Block 1.
• Sew a 3 1/2" medium blue square between two of the Tri-Recs units. Press toward the square.
• Sew a 4-patch to both sides of the remaining Tri-Recs units. (Watch placement!) Press toward the 4-patches.
• Join the three rows. Press the seams toward the center.

Directions for Sashes, Border and Binding
From yellow solid cut:
5 - 2" strips, recut into 17 - 9 1/2" sashes

From medium blue fabric cut:
1 - 2" strip, recut into 12 stepping stones

From dark blue print cut:
4 - 3 1/2" strips for border

• Using the quilt picture as a guide, sew the sashing strips and blocks together in two rows of three blocks. Press the seams toward the sashes.
• Construct three horizontal sashing rows made up of three sashing strips and four blue stepping stones. Press the seams toward the sashes.
• Join the rows of blocks and horizontal sashes. Press toward the sashing.

(Click on image for larger view)

Top of page