 |
 |
 |
 |
 |
 |
 |
| Tutorials > Easy Square |
| Using the Flip n Set
Cut large triangles for setting blocks on point. |
 |
Step 1 With tool open, find the finished size of blocks to be set on point and cut strips to width indicated on tool. |
 | Step 2 Lay the tool on the strip with point aligned at top of strip and match measurement line along bottom of strip. Cut on outside edge of tool. Note: Flip n Set cuts generous size triangles to allow for trimming. |
 | Step 3 Rotate tool and align point with bottom of strip and edge of tool with edge of fabric. Make the second cut. |
 | Step 4 Repeat, rotating the tool and cutting to end of strip. Note: For corner triangles cut 2 squares the size of the finished blocks. Cut each on the diagonal. |
| For Blocks with Sashing Add the finished width of one sashing to the finished size of the block to determine size strip to cut for setting triangles. EXAMPLE: 12" block + 2" sashing = 14" blocks. |
 |
Any Questions or Comments, please e-mail us or call 1-800-660-0415.
© 2006 EZ Quilting by Wrights